Overview
You ran the compatibility check, and it told you your PC can’t run Windows 11. Before you accept that, it is worth knowing something that catches a lot of people out:
A large share of “incompatible” PCs are perfectly capable machines with a setting switched off in firmware.
TPM 2.0 and Secure Boot are both requirements, and both are frequently present but disabled on PCs that shipped with Windows 10. Turning them on is a few minutes in the BIOS, costs nothing, and flips the machine from unsupported to supported.
This guide covers how to find out which requirement you actually failed, how to fix the ones that are fixable, and what your real options are if the hardware genuinely falls short.
The requirements, officially
Microsoft’s published minimums for Windows 11 are:
| Component | Requirement |
|---|---|
| Processor | 1 GHz or faster, 2 or more cores, compatible 64-bit processor or SoC |
| RAM | 4 GB or greater |
| Storage | 64 GB or greater available |
| Firmware | UEFI, Secure Boot capable |
| TPM | Trusted Platform Module version 2.0 |
| Graphics | DirectX 12 compatible with WDDM 2.0 driver |
| Display | 720p, 9 inches or larger, 8 bits per colour channel |
There is also a supported processor list maintained separately by Microsoft. A CPU can meet the 1 GHz, two-core minimum and still not be on that list — which is the requirement that most often cannot be worked around.
For a direct upgrade from Windows 10, you need to be on version 2004 or later with the September 2021 security update or later installed.
Step 1: Find out what you actually failed
Do not guess. Run the PC Health Check app, which names the specific requirement that failed. The difference matters enormously:
- “TPM 2.0 must be supported and enabled” > very often fixable in BIOS
- “The PC must support Secure Boot” > often fixable in BIOS
- “The processor isn’t supported” > generally not fixable
- “System disk needs to be 64 GB or larger” > fixable with a bigger drive
Write down the exact wording before doing anything else.
Step 2: Check whether TPM is there but switched off
Check the current state first:
- Press
Windows + R - Type
tpm.mscand press Enter - Read what it says
If it says “Compatible TPM cannot be found”, it may genuinely be absent — or it may be disabled in firmware. Check the firmware before concluding anything.
If it shows a TPM with Specification Version 1.2, that is not enough. Some systems can be switched from 1.2 to 2.0 in firmware; many cannot.
If it shows Specification Version 2.0 and says the TPM is ready for use, this requirement is already met.
Turning TPM on in BIOS
The setting has three common names depending on your hardware, which is why people miss it:
- Intel systems:
PTTorIntel Platform Trust Technology - AMD systems:
fTPMorAMD fTPM switch - Generic:
TPM Device,Security Device,Trusted Computing
How to get there:
- Restart the PC
- Press the setup key as it starts — usually
Del,F2,F10orEscdepending on the manufacturer - Look under Security, Advanced or Trusted Computing
- Enable the setting
- Save and exit (usually
F10)
If you cannot catch the key at startup, go to Settings > Update & Security > Recovery > Advanced startup > Restart now > Troubleshoot > Advanced options > UEFI Firmware Settings.
Step 3: Check Secure Boot
- Press
Windows + R, typemsinfo32, press Enter - Look at Secure Boot State and BIOS Mode
If BIOS Mode says Legacy, Secure Boot cannot be turned on until the disk is converted from MBR to GPT. Windows includes a conversion tool (MBR2GPT) for this, but it is a disk-level change.
Back up your data before converting a disk. This is the one step in this guide that can cost you files if it goes wrong.
If BIOS Mode says UEFI and Secure Boot State says Off, you can usually just enable Secure Boot in the BIOS under Boot or Security.
Step 4: If the processor is the problem
This is the one with no clean fix. The supported processor list is Microsoft’s, it is specific, and a CPU that is not on it will not become supported.
You will find guides suggesting registry edits and modified installers to bypass the check. Be clear about what that means before trying it:
- Microsoft has stated that PCs which do not meet requirements are not guaranteed to receive updates, including security updates
- Such installs are unsupported, so problems are yours to solve
- Driver and compatibility issues are more likely
For a PC you depend on, an unsupported install is a poor foundation. It may work fine for months and then stop receiving what you need most.
Your realistic options
1. Enable the firmware settings, if that is the issue. Free, reversible, and it resolves a large share of failed checks.
2. Upgrade a component. If the failure is storage or RAM, that is often a cheap fix on a desktop. If it is the CPU, it is usually a new motherboard too, which is effectively a new PC.
3. Enroll in Windows 10 Extended Security Updates. Security patches continue until 12 October 2027, and two of the three enrollment routes cost nothing. This is the sensible holding position while you plan.
4. Replace the machine. For a PC that is close to a decade old, this is often the honest answer.
5. Switch to Linux. A modern Linux distribution runs well on hardware Windows 11 rejects, and for browsing, email and documents it does the job. Try it from a USB stick first, before committing — the adjustment is real.
Frequently asked questions
Is PC Health Check reliable?
It is Microsoft’s own tool and it names the specific requirement that failed, which is what you need. Run it again after changing BIOS settings.
Will enabling TPM delete my data?
Enabling the TPM itself does not. But if you use BitLocker, suspend BitLocker before changing firmware settings or you may be asked for your recovery key at the next boot. Make sure you have that key saved somewhere before you touch anything.
My PC is from 2017 and runs fine. Why is it unsupported?
The requirements are about security features and a specific processor list rather than raw speed. A fast older machine can fail while a slower newer one passes.
Is the upgrade still free?
The upgrade path from Windows 10 has been free for eligible devices. Check Windows Update to see whether yours is offered it.
What happens if I ignore all this and stay on Windows 10?
It keeps working. After consumer ESU ends in October 2027, it stops receiving security updates entirely, and the risk grows from there.
Start here
Run PC Health Check and write down the exact requirement it names. That single sentence decides everything else — a TPM or Secure Boot message usually means a free fix in firmware, and a processor message usually means it is time to plan a replacement.
If it is TPM, check tpm.msc first and then look in your BIOS for PTT on Intel or fTPM on AMD. Those two settings, switched off at the factory, are the most common reason a perfectly good PC reports itself as incompatible.
BIOS menus, setup keys and requirement details vary by manufacturer and change with firmware updates. Check your PC maker’s support pages for your exact model, save your BitLocker recovery key before changing firmware settings, and back up anything important before converting a disk.
