How to Fix a Mac That Won’t Turn On?

Overview

A Mac won’t turn on in three quite different ways, and they need different steps:

  1. No power at all — no light, no sound, no fan, nothing
  2. Power but no display — you hear a chime or a fan, see a glow, but the screen stays black
  3. Powers on but will not start up — Apple logo, a progress bar that stalls, a question mark folder, or a restart loop

Work out which one you have before doing anything, because the right fix differs for each. Then check which chip your Mac has, because the steps diverge there too.

Apple silicon (M-series) and Intel Macs are different. If you can get the Mac running, check > About This Mac. If you cannot, look it up by model — Macs sold from late 2020 onward are mostly Apple silicon.

Case 1: No power at all

Step 1: Rule out the charger and the outlet

Most “dead” Macs are a power problem, not a Mac problem.

  • Try a different outlet
  • Try a different cable and adapter if you can borrow one
  • Check the cable for damage, especially near the connectors
  • Check the port for dust or debris — a blocked USB-C port will not charge
  • Make sure the adapter is powerful enough. A phone charger will not run a MacBook Pro under load, and may not even charge it while it is on

Look for the charging light. On a MagSafe connector, the light tells you a lot: nothing at all usually means no power is reaching it.

Step 2: Leave it charging

A deeply discharged battery does not respond instantly.

Plug it in and leave it for at least 15 minutes before trying again. For a battery that has been flat for weeks, give it longer.

Step 3: Force restart

Hold the power button for 10 seconds, release, then press it normally.

On Macs with Touch ID, the power button is the Touch ID button.

Step 4: Reset the SMC — Intel Macs only

The System Management Controller handles power. Resetting it fixes a real class of no-power faults.

This does not apply to Apple silicon Macs — they have no SMC to reset, and restarting the Mac performs the equivalent.

Intel MacBook with Apple T2 chip:
1. Shut down
2. Hold Control + Option (left side) + Shift (right side) for 7 seconds
3. Keep holding and add the power button for another 7 seconds
4. Release everything, wait a few seconds, press power

Intel MacBook without T2, non-removable battery:
1. Shut down
2. Hold Shift + Control + Option (all left side) + power button for 10 seconds
3. Release, press power

Intel desktop Mac:
1. Shut down and unplug the power cord
2. Wait 15 seconds
3. Plug back in, wait 5 seconds, press power

Case 2: Power but no display

You hear fans or a startup sound, or the keyboard lights up, but the screen is black.

Test the brightness first. Press the brightness-up key several times. It sounds too simple; it is a real cause.

Check whether the Mac is actually running: connect an external monitor. If the external display works, the Mac is fine and the problem is the internal screen or its cable — a hardware repair.

Listen and look. A fan spinning and a keyboard backlight mean it has power and is likely running.

On an Intel Mac, reset the NVRAM: shut down, then start and immediately hold Option + Command + P + R for about 20 seconds. This stores display settings among other things. Apple silicon Macs reset this automatically when needed.

Case 3: Starts but does not finish starting up

Apple logo appears then it stops, or a progress bar stalls

Let it sit. After a macOS update, startup can legitimately take a long time. Give it 30 minutes before intervening.

Then try Safe Mode.

Apple silicon: shut down, hold the power button until “Loading startup options” appears, select your disk, hold Shift and click Continue in Safe Mode.

Intel: start up and immediately hold Shift until the login window appears.

If Safe Mode works, the problem is software — a login item, a third-party extension or a failing driver — not the hardware.

A question mark folder appears

The Mac cannot find a startup disk. Boot to recovery and look at the drive in Disk Utility.

It restarts over and over

Often a failing drive, bad RAM on older Intel models, or a corrupted system. Recovery and Disk Utility are the next step.

Using Recovery Mode

Apple silicon: shut down, press and hold the power button until “Loading startup options” appears, click Options > Continue.

Intel: start up and immediately hold Command + R until the Apple logo appears.

From Recovery you can:

  • Disk Utility > First Aid on your startup disk, to check and repair it
  • Reinstall macOS — this keeps your files, reinstalling the system around them
  • Restore from a Time Machine backup
  • Safari, to look up what you are seeing

Run First Aid first. It is quick, it is safe, and disk problems cause a large share of failed startups.

If none of it works

Note exactly what happens. No light at all, a chime then nothing, a logo then a stall — these are different faults and the detail is what a technician needs.

Check the warranty or AppleCare. Some issues have had extended repair programmes.

Before any repair, think about your data. If the drive still works, data can often be recovered — ask about it before handing the machine over. On Apple silicon Macs the storage is soldered to the board, which makes recovery from a dead logic board difficult and expensive.

This is the moment to be glad about backups, and if you get this Mac running again, to set up Time Machine the same week.

Frequently asked questions

How long should I leave a dead Mac charging?
At least 15 minutes before trying. For a long-flat battery, an hour.

Does resetting the SMC delete anything?
No, and it does not apply to Apple silicon Macs at all.

My Mac turns on but the screen stays black.
Try brightness keys, then an external display. A working external screen points at the internal panel or its cable.

What is the difference between Safe Mode and Recovery?
Safe Mode starts macOS with minimal extras, to test whether software is the cause. Recovery is a separate system for repairing the disk or reinstalling macOS.

Will reinstalling macOS from Recovery erase my files?
Reinstalling over an existing system normally keeps your files. Erasing the disk first does not. Read each screen carefully.

Is a swollen battery dangerous?
Yes. If the case is bulging or the trackpad is lifting, stop using it and take it to a repair centre. Do not puncture or press it.

Work it in this order

Decide which of the three cases you have — no power, no display, or no startup — because the steps diverge completely from there. A fan you can hear changes the whole diagnosis.

If there is no sign of life at all, start with a different charger and a different outlet, then leave it plugged in for fifteen minutes before concluding anything. That alone accounts for a large share of Macs that arrive at repair counters working perfectly.

And check which chip you have before following any reset instructions. SMC and NVRAM resets are Intel-only — on an Apple silicon Mac, a proper restart does the same job and the old key combinations do nothing.

Startup key combinations, recovery steps and supported features differ between Apple silicon and Intel Macs and change between macOS versions. Check Apple’s own support pages for your specific model, and if the Mac is under warranty, find out whether opening it affects that before attempting any hardware work.

Leave a Comment